enum Bool <False True>

An enum for boolean true/false decisions.

Methods

method ACCEPTS

method ACCEPTS(Bool:D: --> Bool:D)

Used for smartmatch comparison. When the right side is True returns always True, when the right side of the match is False returns always False. In particular, ACCEPTS returns always the instance on which it is invoked, that is the right side of a smartmatch. As an example:

my $b = Bool.new( True );
# when True on the right side returns 
# always True 
True  ~~ $b;     # True 
False ~~ $b;     # True 
 
$b = Bool.new( False );
# when False on the right side 
# returns always False 
False ~~ $b;     # False 
True ~~ $b;      # False 

routine succ

method succ(--> Bool:D)

Returns True.

say True.succ;                                    # OUTPUT: «True␤» 
say False.succ;                                   # OUTPUT: «True␤»

succ is short for "successor"; it returns the next enum value. Bool is a special enum with only two values, False and True. When sorted, False comes first, so True is its successor. And since True is the "highest" Bool enum value, its own successor is also True.

routine pred

method pred(--> Bool:D)

Returns False.

say True.pred;                                    # OUTPUT: «False␤» 
say False.pred;                                   # OUTPUT: «False␤»

pred is short for "predecessor"; it returns the previous enum value. Bool is a special enum with only two values, False and True. When sorted, False comes first, so False is the predecessor to True. And since False is the "lowest" Bool enum value, its own predecessor is also False.

routine enums

method enums(--> Hash:D)

Returns a Hash of enum-pairs. Works on both the Bool type and any key.

say Bool.enums;                                   # OUTPUT: «{False => 0, True => 1}␤» 
say False.enums;                                  # OUTPUT: «{False => 0, True => 1}␤»

routine pick

multi method pick(Bool:U --> Bool:D)
multi method pick(Bool:U $count --> Seq:D)

Returns True or False if called without any argument. Otherwise returns $count elements chosen at random (without repetition) from the enum. If * is passed as $count, or $count is greater than or equal to two, then both elements are returned in random order.

say Bool.pick;                                    # OUTPUT: «True␤» 
say Bool.pick(1);                                 # OUTPUT: «(False)␤» 
say Bool.pick(*);                                 # OUTPUT: «(False True)␤»

routine roll

multi method roll(Bool:U --> Bool:D)
multi method roll(Bool:U $count --> Seq:D)

Returns True or False if called without any argument. Otherwise returns $count elements chosen at random. Note that each random choice from the enum is made independently, like a separate coin toss where each side of the coin represents one of the two values of the enum. If * is passed as $count an infinite Seq of Bools is returned.

say Bool.roll;                                    # OUTPUT: «True␤» 
say Bool.roll(3);                                 # OUTPUT: «(True False False)␤» 
say Bool.roll(*);                                 # OUTPUT: «(...)␤»

routine Int

multi method Int(Bool:D --> Int:D)

Returns the value part of the enum pair.

say False.Int;                                # OUTPUT: «0␤» 
say True.Int;                                 # OUTPUT: «1␤»

routine Numeric

multi method Numeric(Bool:D --> Int:D)

Returns the value part of the enum pair.

say False.Numeric;                                # OUTPUT: «0␤» 
say True.Numeric;                                 # OUTPUT: «1␤»

Operators

prefix ?

multi sub prefix:<?>(Mu --> Bool:D)

Coerces its argument to Bool.

prefix so

multi sub prefix:<so>(Mu --> Bool:D)

Coerces its argument to Bool, has looser precedence than prefix:<?> .

Type Graph

Expand above chart

Routines supplied by class Int

Bool inherits from class Int, which provides the following routines:

(Int) method Capture

Defined as:

method Capture()

Throws X::Cannot::Capture.

(Int) routine chr

Defined as:

multi sub    chr(Int:D  --> Str:D)
multi method chr(Int:D: --> Str:D)

Returns a one-character string, by interpreting the integer as a Unicode codepoint number and converting it to the corresponding character.

Example:

65.chr;  # returns "A" 
196.chr; # returns "Ä"

(Int) routine expmod

Defined as:

multi sub    expmod(      $x,     $y,     $mod --> Int:D)
multi sub    expmod(Int:D $x, Int $y, Int $mod --> Int:D)
multi method expmod(Int:D:    Int $y, Int $mod --> Int:D)

Returns the given Int raised to the $y power within modulus $mod, that is gives the result of ($x ** $y) mod $mod. The subroutine form can accept non-Int arguments, which will be coerced to Int.

say expmod(4, 2, 5);    # OUTPUT: «1␤» 
say 7.expmod(2, 5);     # OUTPUT: «4␤»

$y argument can also be negative, in which case, the result is equivalent to ($x ** $y) mod $mod.

say 7.expmod(-2, 5);     # OUTPUT: «4␤»

(Int) method polymod

Defined as:

method polymod(Int:D: +@mods)

Returns a sequence of mod results corresponding to the divisors in @mods in the same order as they appear there. For the best effect, the divisors should be given from the smallest "unit" to the largest (e.g. 60 seconds per minute, 60 minutes per hour) and the results are returned in the same way: from smallest to the largest (5 seconds, 4 minutes). The last non-zero value will be the last remainder.

say 120.polymod(10);    # OUTPUT: «(0 12)␤» 
say 120.polymod(10,10); # OUTPUT: «(0 2 1)␤»

In the first case, 120 is divided by 10 giving as a remainder 12, which is the last element. In the second, 120 is divided by 10, giving 12, whose remainder once divided by 10 is 2; the result of the integer division of 12 div 10 is the last remainder. The number of remainders will be always one more item than the number of given divisors. If the divisors are given as a lazy list, runs until the remainder is 0 or the list of divisors is exhausted. All divisors must be Ints, unless the method is called on a non-Int number.

my $seconds = 1 * 60*60*24 # days 
            + 3 * 60*60    # hours 
            + 4 * 60       # minutes 
            + 5;           # seconds 
 
say $seconds.polymod(60, 60);                # OUTPUT: «(5 4 27)␤» 
say $seconds.polymod(60, 60, 24);            # OUTPUT: «(5 4 3 1)␤» 
 
say 120.polymod:      1, 10, 10², 10³, 10⁴;  # OUTPUT: «(0 0 12 0 0 0)␤» 
say 120.polymod: lazy 1, 10, 10², 10³, 10⁴;  # OUTPUT: «(0 0 12)␤» 
say 120.polymod:      1, 10, 10² … ∞;        # OUTPUT: «(0 0 12)␤» 
 
say ⅔.polymod(⅓);                            # OUTPUT: «(0 2)␤» 
say 5.Rat.polymod(.3, .2);                   # OUTPUT: «(0.2 0 80)␤» 
 
my @digits-in-base37 = 9123607.polymod(37 xx *); # Base conversion 
say @digits-in-base37.reverse                    # OUTPUT: «[4 32 4 15 36]␤»

To illustrate how the Int, non-lazy version of polymod works, consider this code that implements it:

my $seconds = 2 * 60*60*24 # days 
            + 3 * 60*60    # hours 
            + 4 * 60       # minutes 
            + 5;           # seconds 
 
my @pieces;
for 60, 60, 24 -> $divisor {
    @pieces.push: $seconds mod $divisor;
    $seconds div= $divisor
}
@pieces.push: $seconds;
 
say @pieces; # OUTPUT: «[5 4 3 2]␤»

For a more detailed discussion, see this blog post

(Int) routine is-prime

Defined as:

multi sub    is-prime (Int:D $number --> Bool:D)
multi method is-prime (Int:D: --> Bool:D)

Returns True if this Int is known to be a prime, or is likely to be a prime based on a probabilistic Miller-Rabin test.

Returns False if this Int is known not to be a prime.

say 2.is-prime;         # OUTPUT: «True␤» 
say is-prime(9);        # OUTPUT: «False␤»

(Int) routine lsb

Defined as:

multi method lsb(Int:D:)
multi sub    lsb(Int:D)

Short for "Least Significant Bit". Returns Nil if the number is 0. Otherwise returns the zero-based index from the right of the least significant (rightmost) 1 in the binary representation of the number.

say 0b01011.lsb;        # OUTPUT: «0␤» 
say 0b01010.lsb;        # OUTPUT: «1␤» 
say 0b10100.lsb;        # OUTPUT: «2␤» 
say 0b01000.lsb;        # OUTPUT: «3␤» 
say 0b10000.lsb;        # OUTPUT: «4␤»

(Int) routine msb

Defined as:

multi method msb(Int:D:)
multi sub    msb(Int:D)

Short for "Most Significant Bit". Returns Nil if the number is 0. Otherwise returns the zero-based index from the right of the most significant (leftmost) 1 in the binary representation of the number.

say 0b00001.msb;        # OUTPUT: «0␤» 
say 0b00011.msb;        # OUTPUT: «1␤» 
say 0b00101.msb;        # OUTPUT: «2␤» 
say 0b01010.msb;        # OUTPUT: «3␤» 
say 0b10011.msb;        # OUTPUT: «4␤»

(Int) routine unival

Defined as:

multi sub    unival(Int:D  --> Numeric)
multi method unival(Int:D: --> Numeric)

Returns the number represented by the Unicode codepoint with the given integer number, or NaN if it does not represent a number.

say ord("¾").unival;    # OUTPUT: «0.75␤» 
say 190.unival;         # OUTPUT: «0.75␤» 
say unival(65);         # OUTPUT: «NaN␤»

(Int) method Range

Returns a Range object that represents the range of values supported.

(Int) infix div

multi sub infix:<div>(Int:D, Int:D --> Int:D)

Does an integer division, rounded down.

Routines supplied by class Cool

Bool inherits from class Cool, which provides the following routines:

(Cool) routine abs

Defined as:

sub abs(Numeric() $x)
method abs()

Coerces the invocant (or in the sub form, the argument) to Numeric and returns the absolute value (that is, a non-negative number).

say (-2).abs;       # OUTPUT: «2␤» 
say abs "6+8i";     # OUTPUT: «10␤»

(Cool) method conj

Defined as:

method conj()

Coerces the invocant to Numeric and returns the complex conjugate (that is, the number with the sign of the imaginary part negated).

say (1+2i).conj;        # OUTPUT: «1-2i␤»

(Cool) routine EVAL

Defined as:

method EVAL(*%_)

It calls the subroutine form with the invocant as the first argument, $code, passing along named args, if any.

(Cool) routine sqrt

Defined as:

sub sqrt(Numeric(Cool) $x)
method sqrt()

Coerces the invocant to Numeric (or in the sub form, the argument) and returns the square root, that is, a non-negative number that, when multiplied with itself, produces the original number.

say 4.sqrt;             # OUTPUT: «2␤» 
say sqrt(2);            # OUTPUT: «1.4142135623731␤»

(Cool) method sign

Defined as:

method sign()

Coerces the invocant to Numeric and returns its sign, that is, 0 if the number is 0, 1 for positive and -1 for negative values.

say 6.sign;             # OUTPUT: «1␤» 
say (-6).sign;          # OUTPUT: «-1␤» 
say "0".sign;           # OUTPUT: «0␤»

(Cool) method rand

Defined as:

method rand()

Coerces the invocant to Num and returns a pseudo-random value between zero and the number.

say 1e5.rand;           # OUTPUT: «33128.495184283␤»

(Cool) routine sin

Defined as:

sub sin(Numeric(Cool))
method sin()

Coerces the invocant (or in the sub form, the argument) to Numeric, interprets it as radians, returns its sine.

say sin(0);             # OUTPUT: «0␤» 
say sin(pi/4);          # OUTPUT: «0.707106781186547␤» 
say sin(pi/2);          # OUTPUT: «1␤»

Note that Raku is no computer algebra system, so sin(pi) typically does not produce an exact 0, but rather a very small floating-point number.

(Cool) routine asin

Defined as:

sub asin(Numeric(Cool))
method asin()

Coerces the invocant (or in the sub form, the argument) to Numeric, and returns its arc-sine in radians.

say 0.1.asin;               # OUTPUT: «0.10016742116156␤» 
say asin(0.1);              # OUTPUT: «0.10016742116156␤»

(Cool) routine cos

Defined as:

sub cos(Numeric(Cool))
method cos()

Coerces the invocant (or in sub form, the argument) to Numeric, interprets it as radians, returns its cosine.

say 0.cos;                  # OUTPUT: «1␤» 
say pi.cos;                 # OUTPUT: «-1␤» 
say cos(pi/2);              # OUTPUT: «6.12323399573677e-17␤»

(Cool) routine acos

Defined as:

sub acos(Numeric(Cool))
method acos()

Coerces the invocant (or in sub form, the argument) to Numeric, and returns its arc-cosine in radians.

say 1.acos;                 # OUTPUT: «0␤» 
say acos(-1);               # OUTPUT: «3.14159265358979␤»

(Cool) routine tan

Defined as:

sub tan(Numeric(Cool))
method tan()

Coerces the invocant (or in sub form, the argument) to Numeric, interprets it as radians, returns its tangent.

say tan(3);                 # OUTPUT: «-0.142546543074278␤» 
say 3.tan;                  # OUTPUT: «-0.142546543074278␤»

(Cool) routine atan

Defined as:

sub atan(Numeric(Cool))
method atan()

Coerces the invocant (or in sub form, the argument) to Numeric, and returns its arc-tangent in radians.

say atan(3);                # OUTPUT: «1.24904577239825␤» 
say 3.atan;                 # OUTPUT: «1.24904577239825␤»

(Cool) routine atan2

Defined as:

method atan2($y = 1e0)

Coerces self and argument to Numeric, using them to compute the two-argument arc-tangent in radians.

say 3.atan2;                # OUTPUT: «1.24904577239825␤» 
say ⅔.atan2(⅓);             # OUTPUT: «1.1071487177940904␤»

The first argument defaults to 1, so in the first case the function will return the angle θ in radians between a vector that goes from origin to the point (3, 1) and the x axis.

(Cool) routine sec

Defined as:

sub sec(Numeric(Cool))
method sec()

Coerces the invocant (or in sub form, its argument) to Numeric, interprets it as radians, returns its secant, that is, the reciprocal of its cosine.

say 45.sec;                 # OUTPUT: «1.90359440740442␤» 
say sec(45);                # OUTPUT: «1.90359440740442␤»

(Cool) routine asec

Defined as:

sub asec(Numeric(Cool))
method asec()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its arc-secant in radians.

say 1.asec;                 # OUTPUT: «0␤» 
say sqrt(2).asec;           # OUTPUT: «0.785398163397448␤»

(Cool) routine cosec

Defined as:

sub cosec(Numeric(Cool))
method cosec()

Coerces the invocant (or in sub form, its argument) to Numeric, interprets it as radians, returns its cosecant, that is, the reciprocal of its sine.

say 0.45.cosec;             # OUTPUT: «2.29903273150897␤» 
say cosec(0.45);            # OUTPUT: «2.29903273150897␤»

(Cool) routine acosec

Defined as:

sub acosec(Numeric(Cool))
method acosec()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its arc-cosecant in radians.

say 45.acosec;              # OUTPUT: «0.0222240516182672␤» 
say acosec(45)              # OUTPUT: «0.0222240516182672␤»

(Cool) routine cotan

Defined as:

sub cotan(Numeric(Cool))
method cotan()

Coerces the invocant (or in sub form, its argument) to Numeric, interprets it as radians, returns its cotangent, that is, the reciprocal of its tangent.

say 45.cotan;               # OUTPUT: «0.617369623783555␤» 
say cotan(45);              # OUTPUT: «0.617369623783555␤»

(Cool) routine acotan

Defined as:

sub acotan(Numeric(Cool))
method acotan()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its arc-cotangent in radians.

say 45.acotan;              # OUTPUT: «0.0222185653267191␤» 
say acotan(45)              # OUTPUT: «0.0222185653267191␤»

(Cool) routine sinh

Defined as:

sub sinh(Numeric(Cool))
method sinh()

Coerces the invocant (or in method form, its argument) to Numeric, and returns its Sine hyperbolicus.

say 1.sinh;                 # OUTPUT: «1.1752011936438␤» 
say sinh(1);                # OUTPUT: «1.1752011936438␤»

(Cool) routine asinh

Defined as:

sub asinh(Numeric(Cool))
method asinh()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its Inverse Sine hyperbolicus.

say 1.asinh;                # OUTPUT: «0.881373587019543␤» 
say asinh(1);               # OUTPUT: «0.881373587019543␤»

(Cool) routine cosh

Defined as:

sub cosh(Numeric(Cool))
method cosh()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its Cosine hyperbolicus.

say cosh(0.5);              # OUTPUT: «1.12762596520638␤»

(Cool) routine acosh

Defined as:

sub acosh(Numeric(Cool))
method acosh()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its Inverse Cosine hyperbolicus.

say acosh(45);              # OUTPUT: «4.4996861906715␤»

(Cool) routine tanh

Defined as:

sub tanh(Numeric(Cool))
method tanh()

Coerces the invocant (or in sub form, its argument) to Numeric, interprets it as radians and returns its Tangent hyperbolicus.

say tanh(0.5);              # OUTPUT: «0.46211715726001␤» 
say tanh(atanh(0.5));       # OUTPUT: «0.5␤»

(Cool) routine atanh

Defined as:

sub atanh(Numeric(Cool))
method atanh()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its Inverse tangent hyperbolicus.

say atanh(0.5);             # OUTPUT: «0.549306144334055␤»

(Cool) routine sech

Defined as:

sub sech(Numeric(Cool))
method sech()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its Secant hyperbolicus.

say 0.sech;                 # OUTPUT: «1␤»

(Cool) routine asech

Defined as:

sub asech(Numeric(Cool))
method asech()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its Inverse hyperbolic secant.

say 0.8.asech;              # OUTPUT: «0.693147180559945␤»

(Cool) routine cosech

Defined as:

sub cosech(Numeric(Cool))
method cosech()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its Hyperbolic cosecant.

say cosech(pi/2);           # OUTPUT: «0.434537208094696␤»

(Cool) routine acosech

Defined as:

sub acosech(Numeric(Cool))
method acosech()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its Inverse hyperbolic cosecant.

say acosech(4.5);           # OUTPUT: «0.220432720979802␤»

(Cool) routine cotanh

Defined as:

sub cotanh(Numeric(Cool))
method cotanh()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its Hyperbolic cotangent.

say cotanh(pi);             # OUTPUT: «1.00374187319732␤»

(Cool) routine acotanh

Defined as:

sub acotanh(Numeric(Cool))
method acotanh()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns its Inverse hyperbolic cotangent.

say acotanh(2.5);           # OUTPUT: «0.423648930193602␤»

(Cool) routine cis

Defined as:

sub cis(Numeric(Cool))
method cis()

Coerces the invocant (or in sub form, its argument) to Numeric, and returns cos(argument) + i*sin(argument).

say cis(pi/4);              # OUTPUT: «0.707106781186548+0.707106781186547i␤»

(Cool) routine log

Defined as:

multi sub log(Numeric(Cool) $number, Numeric(Cool) $base?)
multi method log(Cool:D: Cool:D $base?)

Coerces the arguments (including the invocant in the method form) to Numeric, and returns its Logarithm to base $base, or to base e (Euler's Number) if no base was supplied (Natural logarithm). Returns NaN if $base is negative. Throws an exception if $base is 1.

say (e*e).log;              # OUTPUT: «2␤»

(Cool) routine log10

Defined as:

multi sub log10(Cool(Numeric))
multi method log10()

Coerces the invocant (or in the sub form, the invocant) to Numeric, and returns its Logarithm to base 10, that is, a number that approximately produces the original number when raised to the power of 10. Returns NaN for negative arguments and -Inf for 0.

say log10(1001);            # OUTPUT: «3.00043407747932␤»

(Cool) routine exp

Defined as:

multi sub exp(Cool:D $pow, Cool:D $base?)
multi method exp(Cool:D: Cool:D $base?)

Coerces the arguments (including the invocant in the method from) to Numeric, and returns $base raised to the power of the first number. If no $base is supplied, e (Euler's Number) is used.

say 0.exp;      # OUTPUT: «1␤» 
say 1.exp;      # OUTPUT: «2.71828182845905␤» 
say 10.exp;     # OUTPUT: «22026.4657948067␤»

(Cool) method unpolar

Defined as:

method unpolar(Numeric(Cool))

Coerces the arguments (including the invocant in the method form) to Numeric, and returns a complex number from the given polar coordinates. The invocant (or the first argument in sub form) is the magnitude while the argument (i.e. the second argument in sub form) is the angle. The angle is assumed to be in radians.

say sqrt(2).unpolar(pi/4);      # OUTPUT: «1+1i␤»

(Cool) routine round

Defined as:

multi sub round(Numeric(Cool))
multi method round(Cool:D: $unit = 1)

Coerces the invocant (or in sub form, its argument) to Numeric, and rounds it to the unit of $unit. If $unit is 1, rounds to the nearest integer.

say 1.7.round;          # OUTPUT: «2␤» 
say 1.07.round(0.1);    # OUTPUT: «1.1␤» 
say 21.round(10);       # OUTPUT: «20␤»

Always rounds up if the number is at mid-point:

say (−.5 ).round;       # OUTPUT: «0␤» 
say ( .5 ).round;       # OUTPUT: «1␤» 
say (−.55).round(.1);   # OUTPUT: «-0.5␤» 
say ( .55).round(.1);   # OUTPUT: «0.6␤»

Pay attention to types when using this method, as ending up with the wrong type may affect the precision you seek to achieve. For Real types, the type of the result is the type of the argument (Complex argument gets coerced to Real, ending up a Num). If rounding a Complex, the result is Complex as well, regardless of the type of the argument.

9930972392403501.round(1)      .perl.say; # OUTPUT: «9930972392403501␤» 
9930972392403501.round(1e0)    .perl.say; # OUTPUT: «9.9309723924035e+15␤» 
9930972392403501.round(1e0).Int.perl.say; # OUTPUT: «9930972392403500␤»

(Cool) routine floor

Defined as:

multi sub floor(Numeric(Cool))
multi method floor

Coerces the invocant (or in sub form, its argument) to Numeric, and rounds it downwards to the nearest integer.

say "1.99".floor;       # OUTPUT: «1␤» 
say "-1.9".floor;       # OUTPUT: «-2␤» 
say 0.floor;            # OUTPUT: «0␤»

(Cool) method fmt

Defined as:

method fmt($format = '%s')

Uses $format to return a formatted representation of the invocant; equivalent to calling sprintf with $format as format and the invocant as the second argument. The $format will be coerced to Stringy and defaults to '%s'.

For more information about formats strings, see sprintf.

say 11.fmt('This Int equals %03d');         # OUTPUT: «This Int equals 011␤» 
say '16'.fmt('Hexadecimal %x');             # OUTPUT: «Hexadecimal 10␤»

(Cool) routine ceiling

Defined as:

multi sub ceiling(Numeric(Cool))
multi method ceiling

Coerces the invocant (or in sub form, its argument) to Numeric, and rounds it upwards to the nearest integer.

say "1".ceiling;        # OUTPUT: «1␤» 
say "-0.9".ceiling;     # OUTPUT: «0␤» 
say "42.1".ceiling;     # OUTPUT: «43␤»

(Cool) routine truncate

Defined as:

multi sub truncate(Numeric(Cool))
multi method truncate()

Coerces the invocant (or in sub form, its argument) to Numeric, and rounds it towards zero.

say 1.2.truncate;       # OUTPUT: «1␤» 
say truncate -1.2;      # OUTPUT: «-1␤»

(Cool) routine ord

Defined as:

sub ord(Str(Cool))
method ord()

Coerces the invocant (or in sub form, its argument) to Str, and returns the Unicode code point number of the first code point.

say 'a'.ord;            # OUTPUT: «97␤»

The inverse operation is chr.

Mnemonic: returns an ordinal number

(Cool) method path

Defined as:

method path()

DEPRECATED. It's been deprecated as of the 6.d version. Will be removed in the next ones.

Stringifies the invocant and converts it to IO::Path object. Use the .IO method instead.

(Cool) routine chr

Defined as:

sub chr(Int(Cool))
method chr()

Coerces the invocant (or in sub form, its argument) to Int, interprets it as a Unicode code points, and returns a string made of that code point.

say '65'.chr;       # OUTPUT: «A␤»

The inverse operation is ord.

Mnemonic: turns an integer into a character.

(Cool) routine chars

Defined as:

multi sub chars(Cool $x)
multi sub chars(Str:D $x)
multi sub chars(str $x --> int)
method chars(--> Int:D)

Coerces the invocant (or in sub form, its argument) to Str, and returns the number of characters in the string. Please note that on the JVM, you currently get codepoints instead of graphemes.

say 'møp'.chars;    # OUTPUT: «3␤» 
say 'ã̷̠̬̊'.chars;     # OUTPUT: «1␤» 
say '👨‍👩‍👧‍👦🏿'.chars;    # OUTPUT: «1␤»

If the string is native, the number of chars will be also returned as a native int.

Graphemes are user visible characters. That is, this is what the user thinks of as a “character”.

Graphemes can contain more than one codepoint. Typically the number of graphemes and codepoints differs when Prepend or Extend characters are involved (also known as Combining characters), but there are many other cases when this may happen. Another example is \c[ZWJ] (Zero-width joiner).

You can check Grapheme_Cluster_Break property of a character in order to see how it is going to behave:

say ‘ã̷̠̬̊’.uniprops(‘Grapheme_Cluster_Break’); # OUTPUT: «(Other Extend Extend Extend Extend)␤» 
say ‘👨‍👩‍👧‍👦🏿’.uniprops(‘Grapheme_Cluster_Break’); # OUTPUT: «(E_Base_GAZ ZWJ E_Base_GAZ ZWJ E_Base_GAZ ZWJ E_Base_GAZ E_Modifier)␤»

You can read more about graphemes in the Unicode Standard, which Raku tightly follows, using a method called NFG, normal form graphemes for efficiently representing them.

(Cool) routine codes

Defined as:

sub codes(Str(Cool))
method codes()

Coerces the invocant (or in sub form, its argument) to Str, and returns the number of Unicode code points.

say 'møp'.codes;    # OUTPUT: «3␤»

The same result will be obtained with

say +'møp'.ords;    # OUTPUT: «3␤»

ords first obtains the actual codepoints, so there might be a difference in speed.

(Cool) routine flip

Defined as:

sub flip(Cool $s --> Str:D)
method flip()

Coerces the invocant (or in sub form, its argument) to Str, and returns a reversed version.

say 421.flip;       # OUTPUT: «124␤»

(Cool) routine trim

Defined as:

sub trim(Str(Cool))
method trim()

Coerces the invocant (or in sub form, its argument) to Str, and returns the string with both leading and trailing whitespace stripped.

my $stripped = '  abc '.trim;
say "<$stripped>";          # OUTPUT: «<abc>␤»

(Cool) routine trim-leading

Defined as:

sub trim-leading(Str(Cool))
method trim-leading()

Coerces the invocant (or in sub form, its argument) to Str, and returns the string with leading whitespace stripped.

my $stripped = '  abc '.trim-leading;
say "<$stripped>";          # OUTPUT: «<abc >␤»

(Cool) routine trim-trailing

Defined as:

sub trim-trailing(Str(Cool))
method trim-trailing()

Coerces the invocant (or in sub form, its argument) to Str, and returns the string with trailing whitespace stripped.

my $stripped = '  abc '.trim-trailing;
say "<$stripped>";          # OUTPUT: «<  abc>␤»

(Cool) routine lc

Defined as:

sub lc(Str(Cool))
method lc()

Coerces the invocant (or in sub form, its argument) to Str, and returns it case-folded to lower case.

say "ABC".lc;       # OUTPUT: «abc␤»

(Cool) routine uc

Defined as:

sub uc(Str(Cool))
method uc()

Coerces the invocant (or in sub form, its argument) to Str, and returns it case-folded to upper case (capital letters).

say "Abc".uc;       # OUTPUT: «ABC␤»

(Cool) routine fc

Defined as:

sub fc(Str(Cool))
method fc()

Coerces the invocant (or in sub form, its argument) to Str, and returns the result a Unicode "case fold" operation suitable for doing caseless string comparisons. (In general, the returned string is unlikely to be useful for any purpose other than comparison.)

say "groß".fc;       # OUTPUT: «gross␤»

(Cool) routine tc

Defined as:

sub tc(Str(Cool))
method tc()

Coerces the invocant (or in sub form, its argument) to Str, and returns it with the first letter case-folded to title case (or where not available, upper case).

say "abC".tc;       # OUTPUT: «AbC␤»

(Cool) routine tclc

Defined as:

sub tclc(Str(Cool))
method tclc()

Coerces the invocant (or in sub form, its argument) to Str, and returns it with the first letter case-folded to title case (or where not available, upper case), and the rest of the string case-folded to lower case.

say 'abC'.tclc;     # OUTPUT: «Abc␤»

(Cool) routine wordcase

Defined as:

sub wordcase(Str(Cool) $input, :&filter = &tclc, Mu :$where = True)
method wordcase(:&filter = &tclc, Mu :$where = True)

Coerces the invocant (or in sub form, the first argument) to Str, and filters each word that smartmatches against $where through the &filter. With the default filter (first character to upper case, rest to lower) and matcher (which accepts everything), this title-cases each word:

say "raku programming".wordcase;        # OUTPUT: «Raku Programming␤»

With a matcher:

say "have fun working on perl".wordcase(:where({ .chars > 3 }));
                                        # Have fun Working on Perl

With a customer filter too:

say "have fun working on perl".wordcase(:filter(&uc), :where({ .chars > 3 }));
                                        # HAVE fun WORKING on PERL

(Cool) routine samecase

Defined as:

sub samecase(Cool $string, Cool $pattern)
method samecase(Cool:D: Cool $pattern)

Coerces the invocant (or in sub form, the first argument) to Str, and returns a copy of $string with case information for each individual character changed according to $pattern.

Note: The pattern string can contain three types of characters, i.e. uppercase, lowercase and caseless. For a given character in $pattern its case information determines the case of the corresponding character in the result.

If $string is longer than $pattern, the case information from the last character of $pattern is applied to the remaining characters of $string.

say "raKu".samecase("A_a_"); # OUTPUT: «Raku␤» 
say "rAKU".samecase("Ab");   # OUTPUT: «Raku␤»

(Cool) routine uniprop

Defined as:

multi sub uniprop(Str:D, |c)
multi sub uniprop(Int:D $code)
multi sub uniprop(Int:D $code, Stringy:D $propname)
multi method uniprop(|c)

Returns the unicode property of the first character. If no property is specified returns the General Category. Returns a Bool for Boolean properties. A uniprops routine can be used to get the property for every character in a string.

say 'a'.uniprop;               # OUTPUT: «Ll␤» 
say '1'.uniprop;               # OUTPUT: «Nd␤» 
say 'a'.uniprop('Alphabetic'); # OUTPUT: «True␤» 
say '1'.uniprop('Alphabetic'); # OUTPUT: «False␤»

(Cool) sub uniprops

Defined as:

sub uniprops(Str:D $str, Stringy:D $propname = "General_Category")

Interprets the invocant as a Str, and returns the unicode property for each character as a Seq. If no property is specified returns the General Category. Returns a Bool for Boolean properties. Similar to uniprop, but for each character in the passed string.

(Cool) routine uniname

Defined as:

sub uniname(Str(Cool) --> Str)
method uniname(--> Str)

Interprets the invocant or first argument as a Str, and returns the Unicode codepoint name of the first codepoint of the first character. See uninames for a routine that works with multiple codepoints, and uniparse for the opposite direction.

# Camelia in Unicode 
say ‘»ö«’.uniname;
# OUTPUT: «"RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK"␤» 
say "Ḍ̇".uniname; # Note, doesn't show "COMBINING DOT ABOVE" 
# OUTPUT: «"LATIN CAPITAL LETTER D WITH DOT BELOW"␤» 
 
# Find the char with the longest Unicode name. 
say (0..0x1FFFF).sort(*.uniname.chars)[*-1].chr.uniname;
# OUTPUT: ««ARABIC LIGATURE UIGHUR KIRGHIZ YEH WITH HAMZA ABOVE WITH ALEF MAKSURA INITIAL FORM␤»␤»

(Cool) routine uninames

Defined as:

sub uninames(Str:D)
method uninames()

Returns of a Seq of Unicode names for the all the codepoints in the Str provided.

say ‘»ö«’.uninames.perl;
# OUTPUT: «("RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK", "LATIN SMALL LETTER O WITH DIAERESIS", "LEFT-POINTING DOUBLE ANGLE QUOTATION MARK").Seq␤»

Note this example, which gets a Seq where each element is a Seq of all the codepoints in that character.

say "Ḍ̇'oh".comb>>.uninames.perl;
# OUTPUT: «(("LATIN CAPITAL LETTER D WITH DOT BELOW", "COMBINING DOT ABOVE").Seq, ("APOSTROPHE",).Seq, ("LATIN SMALL LETTER O",).Seq, ("LATIN SMALL LETTER H",).Seq)␤»

See uniparse for the opposite direction.

(Cool) routine unimatch

Defined as:

multi sub unimatch(Str:D $str, |c)
multi unimatch(Int:D $code, Stringy:D $pvalname, Stringy:D $propname = $pvalname)

Checks if the given integer codepoint or the first letter of the string given have a unicode property equal to the value you give. If you supply the Unicode property to be checked it will only return True if that property matches the given value.

say unimatch 'A', 'Latin';           # OUTPUT: «True␤» 
say unimatch 'A', 'Latin', 'Script'; # OUTPUT: «True␤» 
say unimatch 'A', 'Ll';              # OUTPUT: «True␤»

(Cool) routine chop

Defined as:

sub chop(Str(Cool))
method chop()

Coerces the invocant (or in sub form, its argument) to Str, and returns it with the last character removed.

say 'perl'.chop;                        # OUTPUT: «per␤»

(Cool) routine chomp

Defined as:

sub chomp(Str(Cool))
method chomp()

Coerces the invocant (or in sub form, its argument) to Str, and returns it with the last character removed, if it is a logical newline.

say 'ab'.chomp.chars;                   # OUTPUT: «2␤» 
say "a\n".chomp.chars;                  # OUTPUT: «1␤»

(Cool) routine substr

Defined as:

sub substr(Str(Cool) $str, |c)
method substr(|c)

Coerces the invocant (or in the sub form, the first argument) to Str, and calls Str.substr with the arguments.

(Cool) routine substr-rw

Defined as:

multi method substr-rw(|) is rw
multi sub substr-rw(|) is rw

Coerces the invocant (or in the sub form, the first argument) to Str, and calls Str.substr-rw with the arguments.

(Cool) routine ords

Defined as:

sub ords(Str(Cool) $str)
method ords()

Coerces the invocant (or in the sub form, the first argument) to Str, and returns a list of Unicode codepoints for each character.

say "Camelia".ords;              # OUTPUT: «67 97 109 101 108 105 97␤» 
say ords 10;                     # OUTPUT: «49 48␤»

This is the list-returning version of ord. The inverse operation in chrs. If you are only interested in the number of codepoints, codes is a possibly faster option.

(Cool) routine chrs

Defined as:

sub chrs(*@codepoints --> Str:D)
method chrs()

Coerces the invocant (or in the sub form, the argument list) to a list of integers, and returns the string created by interpreting each integer as a Unicode codepoint, and joining the characters.

say <67 97 109 101 108 105 97>.chrs;   # OUTPUT: «Camelia␤»

This is the list-input version of chr. The inverse operation is ords.

(Cool) routine split

Defined as:

multi sub    split(  Str:D $delimiter, Str(Cool) $input, $limit = Inf, :$k, :$v, :$kv, :$p, :$skip-empty)
multi sub    split(Regex:D $delimiter, Str(Cool) $input, $limit = Inf, :$k, :$v, :$kv, :$p, :$skip-empty)
multi sub    split(@delimiters, Str(Cool) $input, $limit = Inf, :$k, :$v, :$kv, :$p, :$skip-empty)
multi method split(  Str:D $delimiter, $limit = Inf, :$k, :$v, :$kv, :$p, :$skip-empty)
multi method split(Regex:D $delimiter, $limit = Inf, :$k, :$v, :$kv, :$p, :$skip-empty)
multi method split(@delimiters, $limit = Inf, :$k, :$v, :$kv, :$p, :$skip-empty)

[1]

Coerces the invocant (or in the sub form, the second argument) to Str, and splits it into pieces based on delimiters found in the string.

If $delimiter is a string, it is searched for literally and not treated as a regex. You can also provide multiple delimiters by specifying them as a list; mixing Cool and Regex objects is OK.

say split(';', "a;b;c").perl;               # OUTPUT: «("a", "b", "c")␤» 
say split(';', "a;b;c", 2).perl;            # OUTPUT: «("a", "b;c").Seq␤» 
 
say split(';', "a;b;c,d").perl;             # OUTPUT: «("a", "b", "c,d")␤» 
say split(/\;/, "a;b;c,d").perl;            # OUTPUT: «("a", "b", "c,d")␤» 
say split(/<[;,]>/, "a;b;c,d").perl;        # OUTPUT: «("a", "b", "c", "d")␤» 
 
say split(['a', /b+/, 4], '1a2bb345').perl; # OUTPUT: «("1", "2", "3", "5")␤»

By default, split omits the matches, and returns a list of only those parts of the string that did not match. Specifying one of the :k, :v, :kv, :p adverbs changes that. Think of the matches as a list that is interleaved with the non-matching parts.

The :v interleaves the values of that list, which will be either Match objects, if a Regex was used as a matcher in the split, or Str objects, if a Cool was used as matcher. If multiple delimiters are specified, Match objects will be generated for all of them, unless all of the delimiters are Cool.

say 'abc'.split(/b/, :v);               # OUTPUT: «(a ｢b｣ c)␤» 
say 'abc'.split('b', :v);               # OUTPUT: «(a b c)␤»

:k interleaves the keys, that is, the indexes:

say 'abc'.split(/b/, :k);               # OUTPUT: «(a 0 c)␤»

:kv adds both indexes and matches:

say 'abc'.split(/b/, :kv);               # OUTPUT: «(a 0 ｢b｣ c)␤»

and :p adds them as Pairs, using the same types for values as :v does:

say 'abc'.split(/b/, :p);               # OUTPUT: «(a 0 => ｢b｣ c)␤» 
say 'abc'.split('b', :p);               # OUTPUT: «(a 0 => b c)␤»

You can only use one of the :k, :v, :kv, :p adverbs in a single call to split.

Note that empty chunks are not removed from the result list. For that behavior, use the :skip-empty named argument:

say ("f,,b,c,d".split: /","/             ).perl;  # OUTPUT: «("f", "", "b", "c", "d")␤» 
say ("f,,b,c,d".split: /","/, :skip-empty).perl;  # OUTPUT: «("f", "b", "c", "d")␤»

(Cool) routine lines

Defined as:

sub lines(Str(Cool))
method lines()

Coerces the invocant (and in sub form, the argument) to Str, decomposes it into lines (with the newline characters stripped), and returns the list of lines.

say lines("a\nb\n").join('|');          # OUTPUT: «a|b␤» 
say "some\nmore\nlines".lines.elems;    # OUTPUT: «3␤»

This method can be used as part of an IO::Path to process a file line-by-line, since IO::Path objects inherit from Cool, e.g.:

for 'huge-csv'.IO.lines -> $line {
    # Do something with $line 
}
 
# or if you'll be processing later 
my @lines = 'huge-csv'.IO.lines;

Without any arguments, sub lines operates on $*ARGFILES, which defaults to $*IN in the absence of any filenames.

To modify values in place use is copy to force a writable container.

for $*IN.lines -> $_ is copy { s/(\w+)/{$0 ~ $0}/; .say }

(Cool) method words

Defined as:

method words(Cool:D: |c)

Coerces the invocant (or first argument, if it is called as a subroutine) to Str, and returns a list of words that make up the string. Check Str.words for additional arguments and its meaning.

say <The quick brown fox>.words.join('|');     # OUTPUT: «The|quick|brown|fox␤» 
say <The quick brown fox>.words(2).join('|');  # OUTPUT: «The|quick␤» 

Cool is the base class for many other classes, and some of them, like Match, can be converted to a string. This is what happens in this case:

say ( "easy come, easy goes" ~~ m:g/(ea\w+)/).words(Inf);
# OUTPUT: «(easy easy)␤» 
say words( "easy come, easy goes" ~~ m:g/(ea\w+)/ , ∞);
# OUTPUT: «(easy easy)␤»

The example above illustrates two of the ways words can be invoked, with the first argument turned into invocant by its signature. Of course, Inf is the default value of the second argument, so in both cases (and forms) it can be simply omitted.

Only whitespace (including no-break space) counts as word boundaries

say <Flying on a Boeing 747>.words.join('|');  # OUTPUT: «Flying|on|a|Boeing|747␤»

In this case, "Boeing 747" includes a (visible only in the source) no-break space; words still splits the (resulting) Str on it, even if the original array only had 4 elements:

say <Flying on a Boeing 747>.join('|');        # OUTPUT: «Flying|on|a|Boeing 747␤»

Please see Str.words for more examples and ways to invoke it.

(Cool) routine comb

Defined as:

multi sub comb(Regex $matcher, Cool $input, $limit = *)
multi sub comb(Str $matcher, Cool $input, $limit = *)
multi sub comb(Int:D $size, Cool $input, $limit = *)
multi method comb(|c)

Returns a Seq of all (or if supplied, at most $limit) matches of the invocant (method form) or the second argument (sub form) against the Regex, string or defined number.

say "6 or 12".comb(/\d+/).join(", ");           # OUTPUT: «6, 12␤» 
say comb(/\d <[1..9]> /,(11..30)).join("--");
# OUTPUT: 
# «11--12--13--14--15--16--17--18--19--21--22--23--24--25--26--27--28--29␤»

The second statement exemplifies the first form of comb, with a Regex that excludes multiples of ten, and a Range (which is Cool) as $input. comb stringifies the Range before applying .comb on the resulting string. Check Str.comb for its effect on different kind of input strings. When the first argument is an integer, it indicates the (maximum) size of the chunks the input is going to be divided in

say comb(3,[3,33,333,3333]).join("*");  # OUTPUT: «3 3*3 3*33 *333*3␤»

In this case the input is a list, which after transformation to Str (which includes the spaces) is divided in chunks of size 3.

(Cool) method contains

Defined as:

method contains(Cool:D: |c)

Coerces the invocant to a Str, and calls Str.contains on it. Please refer to that version of the method for arguments and general syntax.

say 123.contains("2")# OUTPUT: «True␤»

Since Int is a subclass of Cool, 123 is coerced to a Str and then contains is called on it.

say (1,1, * + * … * > 250).contains(233)# OUTPUT: «True␤»

Seqs are also subclasses of Cool, and they are stringified to a comma-separated form. In this case we are also using an Int, which is going to be stringified also; "233" is included in that sequence, so it returns True. Please note that this sequence is not lazy; the stringification of lazy sequences does not include each and every one of their components for obvious reasons.

(Cool) routine index

Defined as:

multi sub index(Cool $s, Cool $needle, Cool $pos = 0)
method    index(Cool:D: |c)

Coerces the first two arguments (in method form, also counting the invocant) to a Str, and searches for $needle in the string $s starting from $startpos. It returns the offset into the string where $needle was found, and an undefined value if it was not found.

See the documentation in type Str for examples.

(Cool) routine rindex

Defined as:

multi sub    rindex(Str(Cool) $haystack, Str(Cool) $needle, Int(Cool) $startpos = $haystack.chars)
multi method rindex(Str(Cool) $haystack: Str(Cool) $needle, Int(Cool) $startpos = $haystack.chars)

Coerces the first two arguments (including the invocant in method form) to Str and $startpos to Int, and returns the last position of $needle in $haystack not after $startpos. Returns an undefined value if $needle wasn't found.

See the documentation in type Str for examples.

(Cool) method match

Defined as:

multi method match(Cool:D: $target, *%adverbs)

Coerces the invocant to Str and calls the method match on it.

(Cool) routine roots

Defined as:

multi sub roots(Numeric(Cool) $x, Int(Cool) $n)
multi method roots(Int(Cool) $n)

Coerces the first argument (and in method form, the invocant) to Numeric and the second ($n) to Int, and produces a list of $n Complex $n-roots, which means numbers that, raised to the $nth power, approximately produce the original number.

For example

my $original = 16;
my @roots = $original.roots(4);
say @roots;
 
for @roots -> $r {
    say abs($r ** 4 - $original);
}
 
# OUTPUT:«2+0i 1.22464679914735e-16+2i -2+2.44929359829471e-16i -3.67394039744206e-16-2i␤» 
# OUTPUT:«1.77635683940025e-15␤» 
# OUTPUT:«4.30267170434156e-15␤» 
# OUTPUT:«8.03651692704705e-15␤» 
# OUTPUT:«1.04441561648202e-14␤» 

(Cool) method match

Defined as:

method match(|)

Coerces the invocant to Stringy and calls Str.match.

(Cool) method subst

Defined as:

method subst(|)

Coerces the invocant to Stringy and calls Str.subst.

(Cool) method trans

Defined as:

method trans(|)

Coerces the invocant to Str and calls Str.trans

(Cool) method IO

Defined as:

method IO(--> IO::Path:D)

Coerces the invocant to IO::Path.

.say for '.'.IO.dir;        # gives a directory listing 

Routines supplied by role Real

Bool inherits from class Int, which does role Real, which provides the following routines:

(Real) method Bridge

Defined as:

method Bridge(Real:D:)

Default implementation coerces the invocant to Num and that's the behavior of this method in core Real types. This method primarily exist to make it easy to implement custom Real types by users, with the Bridge method returning one of the core Real types (NOT necessarily a Num) that best represent the custom Real type. In turn, this lets all the core operators and methods obtain a usable value they can work with.

As an example, we can implement a custom Temperature type. It has a unit of measure and the value, which are given during instantiation. We can implement custom operators or conversion methods that work with this type. When it comes to regular mathematical operators, however, we can simply use the .Bridge method to convert the Temperature to Kelvin expressed in one of the core numeric types:

class Temperature is Real {
    has Str:D  $.unit  is required where any <K F C>;
    has Real:D $.value is required;
    method new ($value, :$unit = 'K') { self.bless :$value :$unit }
    # Note: implementing .new() that handles $value of type Temperature is left as an exercise 
 
    method Bridge {
        when $!unit eq 'F' { ($!value + 459.67) × 5/9 }
        when $!unit eq 'C' {  $!value + 273.15 }
        $!value
    }
    method gist { self.Str }
    method Str  { "$!value degrees $!unit" }
}
 
sub postfix:<℃> { Temperature.new: $^value, :unit<C> }
sub postfix:<℉> { Temperature.new: $^value, :unit<F> }
sub postfix:<K> { Temperature.new: $^value, :unit<K> }
 
my $human := 36.6℃;
my $book  := 451℉;
my $sun   := 5778K;
say $human;                # OUTPUT: «36.6 degrees C␤» 
say $human + $book + $sun; # OUTPUT: «6593.677777777778␤» 
say 123K + 456K;           # OUTPUT: «579␤»

As we can see from the last two lines of the output, the type of the bridged result is not forced to be any particular core type. It is a Rat, when we instantiated Temperature with a Rat or when conversion was involved, and it is an Int when we instantiated Temperature with an Int.

(Real) method Complex

method Complex(Real:D: --> Complex:D)

Converts the number to a Complex with the number converted to a Num as its real part and 0e0 as the imaginary part.

(Real) method Rat

method Rat(Real:D: Real $epsilon = 1e-6)

Converts the number to a Rat with the precision $epsilon.

(Real) method Real

Defined as:

multi method Real(Real:D: --> Real:D)
multi method Real(Real:U: --> Real:D)

The :D variant simply returns the invocant. The :U variant issues a warning about using an uninitialized value in numeric context and then returns self.new.

(Real) routine rand

sub term:<rand> (--> Num:D)
method rand(Real:D: --> Real:D)

Returns a pseudo-random number between zero (inclusive) and the number (non-inclusive). The Bridge method is used to coerce the Real to a numeric that supports rand method.

The term form returns a pseudo-random Num between 0e0 (inclusive) and 1e0 (non-inclusive.)

(Real) method sign

method sign(Real:D:)

Returns -1 if the number is negative, 0 if it is zero and 1 otherwise.

(Real) method round

method round(Real:D: $scale = 1)

Rounds the number to scale $scale. If $scale is 1, rounds to an integer. If scale is 0.1, rounds to one digit after the comma etc.

(Real) method floor

method floor(Real:D --> Int:D)

Return the largest integer not greater than the number.

(Real) method ceiling

method ceiling(Real:D --> Int:D)

Returns the smallest integer not less than the number.

(Real) method truncate

method truncate(Real:D --> Int:D)

Rounds the number towards zero.

(Real) method polymod

method polymod(Real:D: +@mods)

Returns the remainders after applying sequentially all divisors in the @mods argument; the last element of the array will be the last remainder.

say (1e8+1).polymod(10 xx 8);  # OUTPUT: «(1 0 0 0 0 0 0 0 1)␤»

10 xx 8 is simply an array with eight number 10s; the first division by 10 will return 1 as a remainder, while the rest, up to the last, will return 0. With 8 divisors, as above, the result will have one more elements, in this case for the last remainder.

(Real) method base

method base(Real:D: Int:D $base where 2..36, $digits? --> Str:D)

Converts the number to a string, using $base as base. For $base larger than ten, capital Latin letters are used.

255.base(16);            # 'FF'

The optional $digits argument asks for that many digits of fraction (which may not be negative). If omitted, a reasonable default is chosen based on type. For Int this default is 0. For Num, the default is 8. For Rational, the number of places is scaled to the size of the denominator, with a minimum of 6.

A special value of Whatever (*) can be given as $digits, which functions the same as when $digits is not specified for all Real types except the Rationals. For Rationals, the Whatever indicates that you wish all of the possible digits of the fractional part, but use caution: since there's no detection of repeating fractional parts (the algorithm will eventually stop after generating 2**63 digits).

The final digit produced is always rounded.

say pi.base(10, 3);      # OUTPUT: «3.142␤» 
say (1/128).base(10, *); # OUTPUT: «0.0078125␤» 
say (1/100).base(10, *); # OUTPUT: «0.01␤» 
say (1/3)  .base(10, *); # WRONG: endlessly repeating fractional part

For reverse operation, see parse-base